Security Grille Installation

Our client is based just outside of Wigan and LOCK-TEC are proud to be able to install and maintain their various security systems. In this instance, to reduce the chance of forced entry through a group of doors, LOCK-TEC suggested that security grilles installed on the inside of the doors would be the perfect solution for the requirement.

First of all, the security grilles are delivered to site and assembled. Taking into account the various widths of the doors, the security grilles, which sit within their own frames, are cut to size and assembled.

The assembled units are put into place to ensure that the unit is the correct size for the door and that the grille mechanism and locking system are working correctly.
With the frame in place, to ensure that all fixings are perfectly aligned to the door that the grille is being installed on, the frame is used to created pilot holes where all the fixings will be secured.
The frame is then removed and where the pilot holes have been located, full drill holes are bored into the wall. Note here that at LOCK-TEC we are a tidy lot and while the wall is being drilled an assistant is on hand with a vacuum to ensure that a minimal amount of dust is created in the room and that the work area is kept clean at all times!!!
With the walls drilled and ready, the frames are mounted to the group of doors and secured to the wall. As you can see here, the grilles are in the open position and fixed in such a way that they do not overlap into the exit route. This is very important as in an emergency these doors may be used as an escape route.
Finally, the grilles are locked and secured in place. The potential intruder is faced with a physical barrier if they want to attempt to enter the premises via this route. LOCK-TEC have provided a strong, secure, neat and professional solution to the clients problem.
Just to prove that this security solution can be applied to almost any vulnerable position within a building, the requirement for protecting the windows can also be dealt with.
Here we can see that by using the same methods of installation, the grilles can be applied to the windows and the chances of this room being broken into via this route are dramatically reduced.
 
 
Lock-tec (UK) Ltd, 6 Dane Street, Northwich, Cheshire, CW9 5HA
Company Registration Number - 06655590